Unit installation

Appendix D Command Language Installation and Operation Manual
D-44 Supervisory Terminal Commands FCD-E1
Use
To display the index of commands, type:
HELP<Enter>
You will see the first HELP page. Press the spacebar to see the next page.
INIT DB
Purpose
Load the default parameter values (see Table D-14) instead of the user
configuration.
Syntax
INIT DB
Use
To load the default parameters, type:
INIT DB<Enter>
FCD-E1 displays the following message:
FCD Supervisory Port On Line. Type 'H' for help
Then the time and date fields followed by the FCD-E1 prompt.
Table D-14. FCD-E1 Default Configuration Used with Supervision Terminal
Type Parameter Designation Default Value
General PASSWORD
NODE (node number)
CLEAR SCREEN
CURSOR HOME
CURSOR RIGHT
RAD
0
00 00 00 00
00 00 00 00
00 00 00 00
System CLK_MASTER
CLK_FBACK
DATE_FORMAT
INT
NONE
YYYY-MM-DD
Main Link and Sublink FRAME
CRC-4
SYNC
IDLE_TS_CODE
RAI
CGA
OOS_SIG
OOS_CODE
MAP_MODE
START_TS
TS_TYPE
NUM_OF_TS
Timeslot Map Type (USER
mode only)
G732N
NO
CCITT
3F
DISABLE
NONE
N/A
00
USER
N/A
N/A
N/A
NC