Unit installation

Appendix D Command Language Installation and Operation Manual
D-42 Supervisory Terminal Commands FCD-E1
DSP TS
Purpose
Display information on the use and type of main link timeslots.
Syntax
DSP TS
Use
1. To display the timeslot information, type:
DSP TS<Enter>
A typical display is shown below:
TS : NO 1 NO 2 NO 3 NO 4 NO 5 NO 6 NO 7 NO 8 NO 9
NO 10
TYPE: NC NC NC NC NC NC NC NC NC
NC
DEST: NA NA NA NA NA NA NA NA NA
NA
TS : NO 11 NO 12 NO 13 NO 14 NO 15 NO 16 NO 17 NO 18 NO 19
NO 20
TYPE: NC NC NC NC NC NC NC NC NC
NC
DEST: NA NA NA NA NA NA NA NA NA
NA
TS : NO 21 NO 22 NO 23 NO 24 NO 25 NO 26 NO 27 NO 28 NO 29
NO 30 NO 31
TYPE: NC NC NC NC NC NC NC NC NC
NC NC
DEST: NA NA NA NA NA NA NA NA NA
NA NA
The fields included in the timeslot displays are listed below:
TS Indicates the main link timeslot number, 1 through 31.
TYPE Indicates the timeslot type:
NC timeslot not connected (FCD-E1 inserts the idle code in such
timeslots).
DATA data channel.
VOICE voice channel.
DEDIC timeslot dedicated to management traffic.
DEST Indicates the port (sub or channel) using that timeslot.
EXIT
Purpose
End the current session and return control to the FCD-E1 front panel.