Unit installation

Installation and Operation Manual Appendix D Command Language
FCD-E1 Supervisory Terminal Commands D-15
DATE
Purpose
Set the date for the FCD-E1 internal clock.
Syntax
DATE
Use
1. To set the date type:
DATE<Enter>
FCD-E1 displays the day field:
DAY = 09
2. Change by pressing F to increase and B to decrease the displayed values.
When done, press <Enter> to display the month field.
MONTH = 07
3. Change by pressing F to increase and B to decrease the displayed values.
When done, press <Enter> to display the year field.
YEAR = 2000
4. Change by pressing F to increase and B to decrease the displayed values.
When done, press <Enter> to display the weekday field.
WEEK DAY = SUN
5. To end, press <Enter> after the weekday field.
DEF AGENT
Purpose
Display and modify the current SNMP agent parameters. Refer to Appendix B for
additional explanations.
To enable SNMP and Telnet management, it is necessary to define all the
parameters.
Syntax
DEF AGENT
Use
1. To define the SNMP agent parameters, type:
DEF AGENT<Enter>
You will see the current agent parameters, under the header OLD AGENT
PARAMETERS
, followed by the entry line for the first parameter,
TELNET_APATHY_TIME.