Unit installation

Appendix D Command Language Installation and Operation Manual D-12 Front Panel Parameters FCD-E1
Table D-6. Download Configuration Parameters
Designation Function Values Configuration Guidelines MODE
Selects the inband transmission mode for the selected link
NONE – Inband SNMP and Telnet traffic is ignored and FCD-E1 does not generate such traffic TS0/F – Inband SNMP and Telnet traffic is received and transmitted in timeslot 0 DEDIC – Inband SNMP and Telnet traffic is received and transmitted in a dedicated, user- selected timeslot FR – For Main link only. Inband SNMP and Telnet traffic is received and transmitted in a dedicated, user-selected timeslot Default: NONE
TS NUM
Selects the dedicated timeslot used for the selected link.
Any number in the range of 1 through 31, consistent with the available timeslots Default: 1
This parameter is displayed only when the DEDIC or Frame Relay mode is selected
SPEED
Selects the data rate used to transfer inband the management traffic for the selected link.
The management traffic data rate is given in kbps: 8, 16, 32, 64 Default: 8
This parameter is displayed only when the DEDIC or Frame Relay mode is selected and is relevant to ML. The SL is fixed at 8 kbps.