Unit installation

Installation and Operation Manual Appendix D Command Language FCD-E1 Front Panel Parameters D-7
Table D-3. Supervisory Configuration Parameters (Cont.)
Designation Function Values Configuration Guidelines CALL ACT
Defines when the call-out function is activated
A-CASE – Call-out is activated in any case. L-FAIL – Call-out is activated only when a link failure occurs or there is loc or remote sync loss. Default: A-CASE
CAL TRG
Controls the use of the call- out trigger
NONE – The call-out function is disabled ALL – The FCD-E1 will initiate a call after each new alarm MAJOR – The FCD-E1 will initiate a call only when a new major alarm condition is detected. Default: NONE