Unit installation

FCD-E1 Front Panel Parameters D-1
Appendix D
Command Language
D.1 General
This appendix provides a detailed description of the FCD-E1 supervision language.
The information appearing in this appendix assumes that the user is familiar with
the FCD-E1 system and with its configuration parameters. If necessary, review
Appendix C for a description of the FCD-E1 operating environment, Chapter 4 for
a general description of the FCD-E1 supervision language syntax, and Chapter 1
for a functional description of the FCD-E1 system.
D.2 Front Panel Parameters
This section lists the FCD-E1 configuration parameters and their functions. The
information is organized in tables for each group of parameters:
Group Display Refer to
System parameters SYSTEM PARAMETER
Table D-1
Main link and sublink parameters LINK PARAM
Table D-2
Supervisory port parameters SP PARAMETERS
Table D-3
Data channel parameters (CH1 and CH2) CHANNEL PRM
Table D-4
BER test parameters BERT PRM
Table D-5
Download parameters DNLOAD PRM
Table D-6
The tables also list the parameter values included in the FCD-E1 default
configuration and important practical configuration guidelines.
The test parameters appearing under the TEST OPTION menu are described in
Error! Cannot open file. in Chapter 5. The performance diagnostics parameters
for the main link and sublink appearing under the DIAGNOSTICS menu are
described in Error! Cannot open file. in Chapter 5.
In addition to the parameters listed in the tables, FCD-E1 supports other parameters,
which can be modified only via the supervisory port. These parameters are listed
and explained in the Supervisory Terminal on page D-13.
Note