Unit installation

Chapter 4 Configuration Installation and Operation Manual
4-20 Using the Menu-Driven Command Mode FCD-E1
Table 4-5. Mnemonic Mode Menu Structure (Cont.)
MM Main Menu
DT Define terminal function parameters submenu
DE10 Select the control codes for use with VT-100 terminals
DT92 Select the control codes for use with TV-920 terminals
DT52 Select the control codes for use with VT-52 terminals
DTF1 Select the control codes for use with Freedom 100 terminals
DTF2 Select the control codes for use with Freedom 200 terminals
DB Display BER commands submenu
DB1 Define the type of test sequence to be used for BER testing on channel 1
DB2 Define the type of test sequence to be used for BER testing on channel 2
DBS Define the type of test sequence to be used for BER testing on sublink
DD Display download configuration commands menu
DDM Define the main inband management parameters
DDS Define the sublink inband management parameters
DG Define the SNMP agent configuration parameters
MI Initialization Commands Menu
ID Load the default configuration instead of the user’s configuration.
ML Test and Loopback Commands Menu
LM Main link loopback commands submenu
LLAM Activate local analog loopback on the main link
LLDM Activate local digital loopback on the main link
LRAM Activate remote analog loopback on the main link
LRDM Activate remote digital loopback on the main link
LS Sublink loopback commands submenu
LLAS Activate local analog loopback on the sublink
LLDS Activate local digital loopback on the sublink
LRAS Activate remote analog loopback on the sublink
LRDS Activate remote digital loopback on the sublink
LBS Activate BER testing on the sublink
LIS Activate inband loop on the sublink
L1 Channel 1 loopback commands submenu
LL1 Local loop
LR1 Activate remote loopback on channel 1
LB1 Activate BER test on channel 1
LI1 Activate inband-activated loopback on channel 1