Specifications

FCD-E1LC Ver. 1.0 Typical Configuration Procedures 5-1
Chapter 5
Configuring FCD-E1LC for
a Typical Application
This chapter provides configuration guidelines for FCD-E1LC systems.
The configuration activities presented in this chapter require that the FCD-E1LC
be first configured using a standard ASCII terminal, as explained in
Chapter 3 .
However, after performing the preliminary configuration of the terminal and the
FCD-E1LC in accordance with
Chapter 4 , the same configuration activities can also
be performed by means of a Telnet host, or an SNMP network management
station.
For general information regarding the supervision language syntax, usage and
commands, refer to
Chapter 4.
Detailed descriptions of each command appear in Appendix D .
5.1 Typical Configuration Procedures
Outline of General Configuration Procedure
To prepare a typical FCD-E1LC system for operation in accordance with customer’s
requirements, perform the following activities in the order given in
Table 5-1 .