Specifications

Chapter 4 Configuration Installation and Operation Manual
4-10 FCD-E1LC Command Language FCD-E1LC Ver. 1.0
Command Purpose Options
DEF TERM VT100
DEF TERM TV920
DEF TERM VT52
DEF TERM FREEDOM100
DEF TERM FREEDOM220
Select the control codes for one of the standard terminal types
DSP AGENT Display the SNMP agent parameters
DSP ALM Display the contents of the alarm buffer and optionally clear the
buffer
/C
/CA
DSP BERT ML Display the results of the last BER measurement made on the main
link
/I /R
/S /C
DSP HDR TST Displays hardware test results
DSP MANAGER LIST Display the network management stations to which the SNMP agent
of this FCD-E1LC unit sends traps
DSP PM ML Display the contents of the main link performance monitoring
registers, and optionally clear these registers
/C
/CA
DSP PM SL Display the contents of the sublink performance monitoring registers,
and optionally clear these registers
/C
/CA
DSP REM AGENT Display information on the remote SNMP agents handled by the
FCD-E1LC IP router
DSP ST CH1
DSP ST CH2
Display status information on a data channel
DSP ST ML Display status information on the main link /C
DSP ST SL Display status information on the sublink /C
DSP ST SYS Display system status
DSP TS Display information on the use and type of main link timeslots
EXIT End the current control session
F Define control codes for the supervision terminal
HELP Displays a concise index of commands and option switches
INIT DB Load the default configuration instead of the user’s configuration
LOOP LOC ANA ML
LOOP LOC ANA SL
LOOP LOC DIG ML
LOOP LOC DIG SL
LOOP REM ANA ML
LOOP REM ANA SL
LOOP REM DIG ML
LOOP REM DIG SL
LOOP LOC CH 1
LOOP LOC CH 2
LOOP REM CH 1
LOOP REM CH 2
LOOP BERT ML
LOOP INBAND ML
Activate the corresponding user-controlled test or loopback.
RESET Reset the FCD-E1LC
TIME Set the time of the FCD-E1LC internal clock