Specifications

Chapter 4 Configuration Installation and Operation Manual
4-8 FCD-E1LC Command Language FCD-E1LC Ver. 1.0
Command Options
Table 4-2 lists general types of options, which are available with some
commands. See details in the explicit command set index,
Table 4-3.
Table 4-2. Command Options
Option Meaning Example of Usage
/A All CLR ALM /A
Clears all the alarms stored by the alarm buffer
/C Clear DSP BERT /C
Display BERT results and clear the BER counter
/CA Clear all DSP PM /CA
Display the performance monitoring counters,
and then clear (reset to 0) all the counters
/I Start the injection of errors DSP BERT ML /I
/R Repeat automatically command
execution. Available only when node
address is 0; not available with Telnet
DSP BERT ML /R
Enables you to monitor the updated results of
the bit error rate test being run on the FCD-E1LC
/S Stop the injection of errors DSP BERT ML /S
Index of Commands
Table 4-3 lists the FCD-E1LC command set in alphabetical order.
Table 4-3. FCD-E1LC Command Set Index
Command Purpose Options
BYE End the current Telnet session
CLR ALM Clear alarms stored in the FCD-E1LC alarm buffer /A
CLR LP LOC ANA ML
CLR LP LOC ANA SL
CLR LP LOC DIG ML
CLR LP LOC DIG SL
CLR LP REM ANA ML
CLR LP REM ANA SL
CLR LP REM DIG ML
CLR LP REM DIG SL
CLR LP LOC CH 1
CLR LP LOC CH 2
CLR LP REM CH 1
CLR LP REM CH 2
CLR LP ML
CLR LP SL
CLR LP CH 1
CLR LP CH 2
Clear the corresponding user-initiated test or loopback.