Specifications

Installation and Operation Manual Chapter 2 Installation and Setup
FCD-E1LC Ver. 1.0 Setting the Internal Jumpers and Switches 2-11
Release
Screws
Figure 2-3. FCD-E1LC Cover Screws
2. Refer to Figure 2-4 and release the cover catches as illustrated in the figure.
If pushing the catches with the nails of your fingers is difficult, you may use a
narrow-blade screwdriver.
Press in this
direction with
your index
finger and...
… simultaneously
press upward edge
of bottom cover
with your thumb
Cover
Catches
Figure 2-4. Releasing FCD-E1LC Cover Catches
3. After catches are released, the cover easily slides off. Figure 2-5 shows a
general view of a typical FCD-E1LC unit after cover is removed.