Specifications

FCD-E1LC Ver. 1.0 Introduction 2-1
Chapter 2
Installation and Setup
2.1 Introduction
This chapter provides installation instructions for the FCD-E1LC.
The chapter presents the following information:
• Safety precautions for installation personnel and users
• Site requirements
• General description of equipment enclosures, the available interface options,
and the FCD-E1LC panels
• Mechanical and electrical installation instructions for the FCD-E1LC
• Operation procedures (including turn-on, normal indications and turn-off).
After installing the system, it is necessary to configure it in accordance with the
specific user's requirements. The preliminary system configuration is performed
by means of a supervision terminal directly connected to the FCD-E1LC
(procedures for using the terminal are given in
Chapter 3 ). The software
necessary for using the terminal is stored in the FCD-E1LC.
After the preliminary configuration and during routine operations, the FCD-E1LC
can also be managed by means of Telnet hosts or SNMP-based network
management stations, e.g., RADview. Refer to the User's Manual of the network
management station for operating instructions; Telnet hosts use the supervision
terminal procedures.
Safety Precautions
No internal settings, adjustment, maintenance, and repairs may be performed by
either the operator or the user; such activities may be performed only by skilled
service personnel who are aware of the hazards involved.
Always observe standard safety precautions during installation, operation, and
maintenance of this product.
Warning