Specifications

Installation and Operation Manual Appendix D Supervision Terminal Commands
FCD-E1LC Ver. 1.0 Commands D-51
CLEAR SCREEN = hhhhhhhh
CURSOR HOME = hhhhhhhh
CURSOR RIGHT = hhhhhhhh
where h indicates hexadecimal digits.
2. To change a code, enter the appropriate hexadecimal digit under the first
digit of the code, the cursor advances to the next digit.
3. Repeat the procedure until all the necessary digits are changed, and then
press <Enter> to end.
HELP
Purpose
Display an index of the supervision terminal commands, and the options available
for each command.
Syntax
HELP
Use
Type:
HELP<Enter>
You will see the first HELP page. Press the spacebar to see the next page.
INIT DB
Purpose
Load the default parameter values (see Table D-12 ) instead of user’s
configuration.
Syntax
INIT DB
Use
To load the default parameters, type:
INIT DB<Enter>
After reloading the default parameters, FCD-E1LC displays the following
message: