Specifications

Appendix D Supervision Terminal Commands Installation and Operation Manual
D-50 Commands FCD-E1LC Ver. 1.0
• DEDIC – timeslot dedicated to management traffic.
DEST Indicates the port (or channel) using that timeslot.
• ML – main link.
• S1 – sublink.
• CH1 – data channel 1
• CH2 – data channel 2.
EXIT
Purpose
End the current communication session.
Syntax
EXIT
Use
• To end the current communication session, type:
EXIT<Enter>
F
Purpose
Define the codes used to be sent to the supervision terminal to perform the
following terminal control functions:
• Clear screen.
• Move cursor to screen home position.
• Move cursor to the right by one position.
If you have a TV920, VT52, VT100, Freedom 100 or Freedom 220 terminal, you
can use the DEF TERM command to set the control codes for that terminal.
Syntax
F
Use
1. To display the current codes, type:
F<Enter>
The terminal function entry screen is displayed. The screen includes three
separate rows, displayed one after the other.
A typical screen, showing all the three rows, is shown below: