Specifications

Installation and Operation Manual Appendix D Supervision Terminal Commands
FCD-E1LC Ver. 1.0 Commands D-47
STATUS OF - MAIN LINK
TYPE = E1
FUNCTION = COPPER UNBALANCE
ALARMS L.SYNC LOSS R.SYNC LOSS
=========== ===========
OFF OFF
LOOPS DIGITAL ANALOG
LOCAL REMOTE LOCAL REMOTE
===== ====== ===== ======
NO NO NO NO
BERT RX_INBAND TX_INBAND
===== ========= =========
NO NO NO
DOWNLOAD MODE = NONE
OOS CNTR = 1
BPV LAST MINUTE = 0
BPV WORST MINUTE = 0
The fields included in the status information displays are listed below:
TYPE Indicates the main link interface, E1.
INTERFACE Indicates the currently selected main link interface type:
COPPER BALANCE or COPPER UNBALANCE, balanced or
unbalanced
ALARMS Indicates the state of the port alarms:
• L.SYNC LOSS – state of local frame synchronization.
• R.SYNC LOSS – state of remote frame synchronization.
LOOPS Indicates the state of loops that can be activated on the
main link:
• DIGITAL LOCAL – This field displays YES to indicate that
the local digital loopback has been activated.
• DIGITAL REMOTE – This field displays YES to indicate that
the remote digital loopback has been activated.
• ANALOG LOCAL – This field displays YES to indicate that
the local analog loopback has been activated.
• ANALOG REMOTE – This field displays YES to indicate
that the remote analog loopback has been activated.
• BERT – This field displays YES to indicate that the BER
test has been activated.
• RX_INBAND This field displays YES when a loopback
has been connected as a result of the reception of the
inband remote loopback activation sequence.
• TX_INBAND This field displays YES to indicate that the
user requested the sending of the inband remote
loopback activation sequence.