Specifications

Installation and Operation Manual Appendix D Supervision Terminal Commands
FCD-E1LC Ver. 1.0 Commands D-37
Designation Function Values Configuration Guidelines
CH1 – Locked to the external clock
supplied to the user data channel 1,
provided the channel timing mode is
DTE2.
CH2 – Locked to the external clock
supplied to the user data channel 2,
provided the channel timing mode is
DTE2.
N/A – Appears when the internal
oscillator has been selected as master
reference, and therefore the fallback
source is not relevant.
Default: NONE
clock oscillator.
DATE_FORMAT
Selects the date
display format
The available selections are
DD/MM/YYYY, MM/DD/YYYY, and
YYYY-MM-DD.
Default: YYYY-MM-DD
DEF TERM
Purpose
Define the control codes for use with one of the following types of terminals:
TV920, VT52, VT100, Freedom 100/110 or Freedom 220, or reset the codes to 0.
If you are using a different type of terminal, use the F command to define the
desired codes. The codes used by the above-mentioned terminals are listed in
Table D-11 .
Table D-11. Supervision Terminal Control Codes
Function
Terminal Type
TV920 VT52 VT100 Freedom 100/110 Freedom 220
Clear Screen 1B2A0000 N/A 1B5B324A 1B2A0000 1B5B324A
Cursor Home 1E000000 1B480000 1B5B4800 1E000000 1B5B4800
Cursor Right 0C000000 1B424000 1B5B3143 0C000000 1B5B0143
Syntax
DEF TERM {‘terminal type’}
Use
1. To reset the terminal control codes to 0, type:
DEF TERM<Enter>
2. To select the control codes for one of the above-mentioned types, type: