Specifications

Appendix D Supervision Terminal Commands Installation and Operation Manual
D-26 Commands FCD-E1LC Ver. 1.0
DEF NAME
Purpose
Define the node name (up to eight alphanumeric characters).
Syntax
DEF NAME
Use
1. To define the FCD-E1LC node name, type:
DEF NAME<Enter>
FCD-E1LC displays the current name in the following format:
OLD NAME = ‘old name’
where ‘old name’ is the name FCD-E1LC is currently assigned.
The current name is followed by the name entry form:
ENTER NODE NAME (MAX 8 CHARACTERS) =
2. Type the desired name, and then press <Enter>. The new name is displayed
in the following format:
CURRENT NAME = ‘name’
where ‘name’ is the FCD-E1LC current node name.
DEF NODE
Purpose
Define the FCD-E1LC node number, or address. The allowed range is 0 to 255.
Syntax
DEF NODE
Use
1. To define the FCD-E1LC node number, type:
DEF NODE<Enter>
FCD-E1LC displays the node entry form:
NODE (0 to 255) =
2. Type the desired number in the range of 0 to 255, and then press <Enter>.
DEF PROMPT
Purpose
Select the supervisory port prompt.