Specifications

Installation and Operation Manual Appendix D Supervision Terminal Commands
FCD-E1LC Ver. 1.0 Commands D-21
Syntax
DEF DNLOAD {[ML] [SL]}
Use
1. To define the main link inband management communication parameters,
type:
DEF DNLOAD ML<Enter>
To define the sublink management communication parameters, type:
DEF DNLOAD SL<Enter>
The first row of the data form is displayed. A typical row is shown below:
DNLOAD MODE
TS0/F
2. Select the desired mode, and then press <Enter>.
If the FRAME RL mode is selected, the following row appears:
TS_NUM SPEED
1 64
3. Select the desired timeslot. The management data rate is always 64 kbps.
4. When done, press <Enter>.
The following row appears:
SA_BIT_4 SA_BIT_5 SA_BIT_6 SA_BIT_6 SA_BIT_8
MGMT ONE ZERO ZERO ZERO
Select the data to be carried by each of the S
a4
to S
a8
bits:
 ONE or ZERO if the selected download mode is FRAME RL
 ONE or ZERO or MGMT if the selected download mode is TS0/F. In this
case, at least one of the bits must be set to MGMT.
5. When done, press <Enter> to end.