Specifications

Installation and Operation Manual Appendix A Connection Data
FCD-E1LC Ver. 1.0 Data Channel Connection Data A-15
FCD-E1LC Side Designation Function User’s Side
18 – Not connected –
19 RTSB RTS (wire B) 31
20 RCEA External Receive Clock (wire A) –
21 – Not connected –
22 DSRB DSR (wire B) 24
23 RCEB External Receive Clock (wire B) –
24 SCEA External Send Clock (wire A) 8
25 – Not connected –
DTE2 Mode
This mode is used to connect to user’s equipment with V.36/RS-449 DCE
interface that provides the transmit and receive clocks to the FCD-E1LC data
channel.
The V.36/RS-449 cable coming from the user’s equipment is connected to the
FCD-E1LC CHANNEL connector through an adapter cable. The adapter cable (see
Figure A-8 ) is terminated in a 25-pin male D-type connector at the FCD-E1LC
side, and a 37-pin female connector at the user’s side. A suitable cable,
designated CBL-HS2R3, is available from RAD.
Cable wiring is given in
Table A-12 .
Table A-12. Wiring of V.36/RS-449 Adapter Cable for DTE2 Mode
FCD-E1LC Side Designation Function User’s Side
1 FG Frame Ground 1
2 SDA Send Data (wire A) 6
3 RDA Receive Data (wire A) 4
4 RTSA RTS (wire A) 13
5 CTSA CTS (wire A) –
6 DSRA DSR (wire A) 12
7 SG Signal Ground 19
8 DCDA DCD (wire A) 7
9 RCB Receive Clock (wire B) –
10 DCDB DCD (wire B) 25
11 SCEB External Send Clock (wire B) 26
12 SCB Send Clock (wire B) –
13 CTSB CTS (wire B) –
14 SDB Send Data (wire B) 24