User`s manual

Chapter 5 Performance RADview FCD-IP User’s Manual
5-16 Displaying Ethernet LAN Statistics

To display error statistics for the LAN:
1. Select the Ethernet LAN.
2. Select Statistics >Table > Errors…
The LAN Errors Statistics dialog box appears (Figure 5-19).
Figure 5-19. LAN Errors Statistics
Table 5-8. LAN Errors Statistics Parameters
Parameter Possible Values / Remarks
Interface The selected interface.
Error Frames
Received Error Frames The number of error frames received.
Transmitted Error Frames The number of error frames transmitted.
Frame Too Long The number of frames that were too long.
FCS & Test Errors
FCS Errors The number of frames received with CRC errors.
Alignment Errors The number of frames received with alignment errors.
SQE Test Errors The number of times the SQE test error is generated by the PLS sublayer for
the selected interface.