User`s manual

Chapter 3 Port Management RADview FCD-IP User’s Manual
3-20 Configuring Physical Parameters
MAIN E1 1 2 3 4 5 21 22 23 24 30 31
DATA 1 +2 D
SUB1/ LINK 2 D D D D D D
VOICE 1 V
VOICE 2 V
VOICE 3
VOICE 4
Figure 3-14. TS Assignment (New HW)
A rectangular grid displays the time slot assignments. Each row and each column
represents the possible connections of a specific port.
Since all ports are connected to MAIN E1/T1 port, the top row shows the TS
assignments of the MAIN E1/T1. For the MAIN E1, there are 31 Time Slots. For the
MAIN T1, there are 24 Time Slots.
Colors, letters and guides indicate information about the time slots and ports
represented in the grid. Their meanings are described below. In addition a Tool-
Tip appears when the mouse cursor passes over a row, indicating the
TS Color Codes
Since each TS has only one type and can be connected to only one port, each TS
column can have only one cell with a letter inside. Both connection cells and port
indicator cells use color codes to relay connection information.
Green + number TS in this port is connected and is not being used for
Management.
Gray + number TS in this port is available for connection, but currently
has no TS connection.
Blue + number TS in this port has no connections and cannot be TS
connected.
Inside Cells Color Codes
Gray empty Cell's port has no current TS connections but can be TS
connected.
Blue empty
Cell's port has no TS connections and cannot be TS
connected.
Yellow + letter
Cell's port has at valid TS connection of type indicated
by letter.