User`s manual

RADview FCD-IP User’s Manual Chapter 3 Port Management
Configuring Interface Information 3-9
Configuring LAN Interface Information

To configure interface information for an Ethernet LAN:
1. Select the desired Ethernet LAN.
2. Select Configuration > Interface Info…
The Interface Information dialog box appears.
Figure 3-5. Interface Information – Ethernet LAN
Changing the values for Burn In MAC or Locally Administered will cause
disconnection with the agent.
Table 3-7. Interface Information – Ethernet LAN Parameters
Parameter Possible Values / Remarks
Interface The selected interface.
Description Description of the interface.
Type The type of interface that appears in the MIB IF Table.
Oper Status The operational status of link.
MTU The maximum Transmit Unit for IP fragmentation.
Frames lager than MTUare fragmented into smaller units when sent through the
specified interface.
Rate (Mbps) The transmission speed in Mbps.
Note