User`s manual

RADview FCD-IP User’s Manual Chapter 2 System Management
Switching Between Edit and Agent View 2-23
2. Configure the IP Address for the different managers.
3. Click <Set>.
Table 2-14. Manager List Parameters
Parameter Possible Values / Remarks
Manager ID The ID number of the manager.
IP Address The IP address of the manager.
2.11 Switching Between Edit and Agent View
The device is managed with two different community views: one for the TDM
scope, and one for the rest of the parameters. A password provides protection for
the TDM scope preventing you from unintentionally changing the parameters of
the E1/T1, SHDSL and Voice parameters.
The Password is configured via the terminal.
Once the password has been entered, you will not need to re-enter it again when
switching between Edit and Agent Views in other levels.

To enter the password:
1. Select Options > Password…
The password dialog box appears (Figure 2-24).
Figure 2-24. Password Dialog Box
2. Enter a password (up to twenty characters).
Note