User`s manual

Chapter 2 System Management RADview FCD-IP User’s Manual
2-8 Routing the IP
IP Address Table

To display the IP address table:
• Select Configuration > IP Routing > IP Address....
The IP Addresses Table appears (Figure 2-7).
Figure 2-7. IP Addresses Table
Table 2-5. IP Address Parameters
Parameter Possible Values / Remarks
IP Address The IP address of forwarding device.
1.0.0.0..255.255.255.255
IP Mask A unique 32 bit value allowing the recipient of IP packets to distinguish between
different host IDs.
0.0.0.0..255.255.255.255
Interface The selected interface.
DLCI# Data Link Control Identifier
Only for links with FR protocol type.
[Add…] Click <Add…> to open the Add IP Address dialog box (Figure 2-8). Enter the
desired parameters and click <Set>.
[Change…] Change an address from the IP Address Table by selecting an address and clicking
<Change…>. The Change IP Address dialog box appears. Change parameters and
click <Set>.
[Remove] Remove an address from the IP Address Table by selecting an address and clicking
<Remove>.