User`s manual

Chapter 2 System Management RADview FCD-IP User’s Manual
2-6 Routing the IP
Table 2-3. IP Forwarding Parameters
Parameter Possible Values / Remarks
IP Address The IP address of forwarding device.
IP Mask A unique 32 bit value allowing the recipient of IP packets to distinguish between
different host IDs.
Next Hop IP Address The IP address of the next hop.
Interface The selected interface.
DLCI# Data Link Control Identifier
Only for links with FR protocol type.
Interface Cost (Metric) The number of routers through which a packet must pass to arrive at its destination.
1..15
Type
Other, Invalid, Direct, Indirect
Protocol The protocol of the interface.
Local indicates a local IP address
NetMgnt indicates a static IP address
RIP2 indicates a dynamic IP address
OSPF indicates IP address is determined using OSPF protocol.
Age The number of seconds since this route was last updated.
[Add…] Click <Add…> to open the Add IP Net dialog box. Enter the desired parameters
and click <Set>.
[Remove] Remove an address from the IP Forwarding Table by selecting an address and
clicking <Remove>.
Only static addresses can be changed.