User`s manual

Chapter 2 System Management RADview FCD-IP User’s Manual
2-4 Setting Bridging Parameters
Table 2-2. Static Forwarding Table Parameters
Parameter Possible Values / Remarks
MAC Address The physical address of the device.
Interface The selected interface.
DLCI# Data Link Control Identifier
Only for links with FR protocol type.
[Add…] Click <Add…> to open the Add IP Net Entry dialog box (Figure 2-4).
Enter the desired parameters and click <Set>.
[Remove] Remove an address from the Static Forwarding Table by selecting an address and
clicking <Remove>.

To add a static entry:
1. In the Static Forwarding table (Figure 2-3), click <Add…>.
The Add Static Entry dialog box appears (Figure 2-4).
Figure 2-4. Add Static Entry
2. Configure desired parameters (see Table 2-2).
3. Click <Set>.