User`s manual

Chapter 2 System Management RADview FCD-IP User’s Manual
2-2 Viewing and Modifying System Configuration
2.2 Viewing and Modifying System Configuration
RADview enables you to view and modify the configuration of the FCD-IP.

To view or modify FCD-IP system information:
1. Select Configuration > System Info...
or
click the shortcut key on the toolbar
.
The System Information dialog box appears (See figure below).
Figure 2-2. System Information
2. Enter the required settings. You can change the following fields: Name,
Contact, Location, Aging (minutes allowed for station to be inactive without
being removed from the network) and Enable Broadcast Control.
3. Click<Set>to implement the changes.
Table 2-1. System Information Parameters
Parameter Possible Values / Remarks
Description Description of hardware and software.
Object ID Device type.
Name Meaningful name assigned to this device.
Contact Name of contact person responsible for device.
Location Location of this device.