User`s manual

Chapter 6 Configuring FCD-IP for a Typical Application RADview FCD-IP User’s Manual
6-6 Configuring the LAN Interface
Figure 6-7. Interface Information - Ethernet LAN
4. From the LAN State drop-down list, select Enable.
5. Click <Set>.
Configuring the LAN IP Address

To configure the LAN IP Address:
1. Switch to Agent View: Click the Agent View button on the toolbar
.
2. Select Configuration > Network Parameters > IP Address....
The IP Addresses Table appears (Figure 6-3).
Figure 6-8. IP Addresses Table