Specifications

Chapter 6 Diagnostics and Troubleshooting Installation and Operation Manual
6-4 Monitoring Performance MiTOP-E1/T1 Ver. 1.0
MiTOP-E1/T1
Previous Menu Refresh
Monitoring > Physical Layer > Connection Statistics
Adaptive State Idle
Good Packets Received 0
Good Packets Transmitted 0
Missing Packets 0
Misordered Packets 0
Discarded Packets 0
OAM Failures 0
Jitter Buffer Underrun 0
Jitter Buffer Overrun 0
Jitter Buffer Current Level [us] 0
Jitter Buffer Max Level[us] 0
Jitter Buffer Min Level[us] 0
Dpll Overflow 0
CDC Detected 0
Delta-T self test faild 0
Delta-T timeout 0
Sticky overflow 0
Virtual JB un/overrun 0
Reacquisition Alarm 0
Adapt freeze 0
Reset Counters
Figure 6-3. PW Connection Statistics Screen
Table
6-3. PW Connection Statistics Parameters
Parameter Description
Adaptive State Current state of the adaptive clock
Good Packets Received Total number of good packets received on the PW connection
Good Packets Transmitted Total number of good packets transmitted on the PW connection
Missing Packets Total number of missing packets
Misordered Packets Total number of packets that were successfully reordered
Discarded Packets Total number of packets that were discarded. This counter is controlled by
the Discarded By parameter (Configuration > Applications > Multi service
over PSN > PW)
OAM Failures Number of synchronization loss events on the OAM link