Specifications

MiTOP-E1/T1 Ver. 1.0 Monitoring Performance 6-1
Chapter 6
Diagnostics and
Troubleshooting
This chapter describes how to:
• Monitor performance
• Display system messages
• Run diagnostic tests.
6.1 Monitoring Performance
Displaying the TDM Statistics
The E1 and T1 performance monitoring data is collected at the physical level.
³ To display the TDM statistics:
1. From the E1 or T1 menu (Monitoring > Physical Layer > E1 or T1), select one
of the following:
 Current – the statistics collected during the last second
 15 min – the statistics collected during the current 15 minute interval.
Table 6-1 describes the Ethernet statistic registers.
2. Click Refresh to refresh the screen.
³ To clear the TDM statistics:
• From the E1 or T1 menu (Monitoring > Physical Layer > E1 or T1), select Clear
Statistics.
MiTOP-E1/T1
Monitoring > Physical Layer > E1 > Current Statistics
ES 0
SES 0
UAS 0
BES 0
Figure 6-1. Current TDM Physical Layer Statistics Screen