Specifications

Installation and Operation Manual Chapter 5 Configuring a Typical Application
MiTOP-E1/T1 Ver. 1.0 Configuring ETX-550 5-5
2. From the Service Parameters menu (Configuration > Applications >
Multiservice over PSN > PW > Service Parameters), set the Payload Size to 8.
MiTOP-E1/T1
Configuration > Applications > Multiservice over PSN > PW > Service
Parameters
PW Number 1
PW Name PW Name 1
PW Type CESoPSN
Payload Size [Frames in Packet] [2-47] 8
Payload Size [Bytes] [40-1476] 248
Jitter Buffer [usec] [1500-200000] 1500
E1 Port Number 1
Bundle Timeslots [1–31] 31
Figure 5-6. Configuring PW Payload Size
5.3 Configuring ETX-550
ETX-550 is an Ethernet aggregator that receives the Fast Ethernet traffic from
MiTOP-E1/T1 and transmits it towards the PSN via its Gigabit Ethernet interface.
Setting the Management Parameters
Define the host IP address and add the NMS to the manager list in order to
establish a proper management link to ETX-550.
³ To configure the host IP address:
• From the Host menu (Configuration > System > Host), set the host IP address
to 10.10.10.4.
ETX-550
Configuration>System>Management>Host
1. IP Address ... (10.10.10.4)
2. IP Mask ... (0.0.0.0)
3. Default Gateway ... (0.0.0.0)
4. Read Community ... (Public)
5. Write Community ... (Private)
6. Trap Community ... (Public)
7. DHCP Client >
8. Encapsulation >
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 5-7. Configuring Host IP Parameters for ETX-550