Specifications

Chapter 5 Configuring a Typical Application Installation and Operation Manual

5-4 Configuring MiTOP-E1/T1 MiTOP-E1/T1 Ver. 1.0

Configuring a Pseudowire Connection

The pseudowire connection must be configured to use the CESoPSN

encapsulation and UPD/IP network connectivity.

³ To configure a pseudowire connection:

1. From the General Parameters menu (Configuration > Applications >

Multiservice over PSN > PW > General Parameters), set:

 Source IP: 10.10.10.2

 PW Type: CESoPSN

 PSN Type: UDP/IPv4

MiTOP-E1/T1

Configuration > Applications > Multiservice over PSN > PW > General

Parameters

PW Number 1

PW Name PW Name 1

PW Type

CESoPSN

Source IP

10.10.10.2

PSN Type

UDP/IPv4

Peer Number 1

Owner Manually

OAM Enable

Unreachable Detection

Disable

Multiplexing

Source

Out PW Label [1-8063]

In PW Label [1-127]

Figure

5-5. Configuring General PW Parameters