Specifications

Installation and Operation Manual Chapter 4 Configuration
MiTOP-E1/T1 Ver. 1.0 Additional Tasks 4-17
4.3 Additional Tasks
This section describes additional operations available supported by the
MiTOP-E1/T1 management software, including the following:
• Displaying inventory
• Displaying the MiTOP-E1/T1 status information at the system, physical and
connection levels
• Restoring defaults
• Resetting the unit.
Displaying the MiTOP-E1/T1 Inventory
The MiTOP-E1/T1 inventory displays description of the unit, its hardware,
firmware and software revisions, serial number etc.
³ To display the MiTOP-E1/T1 inventory:
• From the Main menu, select Inventory.
The Inventory menu appears.
MiTOP-E1/T1
Inventory
ID Description Vendor Type Class Entity Name HWRev FWRev SWRev Serial No Alias Asset ID FRU
1 RAD.MiTOP.E1 0 3 MiTOP-E1 0.0 0.0 1.0 123456789 0 True
Figure 4-18. Inventory Screen
Displaying MiTOP-E1/T1 Status
The MiTOP-E1/T1 software provides access to the following status information:
• System level – MAC address and system uptime period
• Physical ports – status of the physical layer alarms and errors
• Connection level – status of the PW connection.
Displaying System Status Information
The System menu includes:
• MAC address of the MiTOP-E1/T1 unit
• MAC address of the PW
• MiTOP-E1/T1 uptime (time elapsed since the last reset in the dd:hh:mm:ss
format).
It also provides access to the log file. For description of MiTOP-E1/T1 system
messages, which are displayed via the Log File screen, refer to
Chapter 6 .