Specifications

Chapter 4 Configuration Installation and Operation Manual
4-16 Configuring MiTOP-E1/T1 for Operation MiTOP-E1/T1 Ver. 1.0
MiTOP-E1/T1
Configuration > Applications > Multiservice over PSN > PW > Service
Parameters
PW Number 1
PW Name PW Name 1
PW Type CESoPSN
Payload Size [Frames in Packet][2-47] 2
Payload Size [Bytes][40-1476] 4
Jitter Buffer [usec][1500-200000] 3000
E1 Port Number 1
Bundle Timeslots [1–31] 31
Figure 4-17. Service Parameters Menu (CESoPSN PW)
Table
4-4. Service Parameters
Parameter Function Values
PW Number Number of pseudowire connection 1
PW Name User-defined name of the PW. This parameter is
configured via the PW menu (
Figure 4-14 ).
Default
PW Type Defines encapsulation type used for PW creation
(see Figure 4-15 )
CESoPSN, SAToP
Payload Size Defines PDU payload length for the PW.
CESoPSN PW – Number of TDM frames in a packet,
SAToP – Number of bytes in a packet.
CESoPSN: 2–47 (E1), 2–60 (T1)
SAToP: 30–1476
Default: 4 (CESoPSN), 128 (SAToP)
Payload Size Translates the bytes per packet payload size value
into bytes by multiplying the payload size by:
• 31 (E1) or 24 (T1) for CESoPSN
• 32 (E1) or 25 (T1) for SAToP.
Jitter Buffer Jitter buffer size for the PW
1500–200000 μsec (CESoPSN)
500–200000 μsec (SAToP)
Default: 1500 (CESoPSN), 500
(SAToP)
E1 Port Number Permanently set to 1. 1
Bundle Time Slots Read-only field reserved for future versions. 31