Specifications

Installation and Operation Manual Chapter 4 Configuration
MiTOP-E1/T1 Ver. 1.0 Configuring MiTOP-E1/T1 for Operation 4-15
Table 4-3. PSN Parameters
Parameter Function Values
PW Number Number of pseudowire connection 1
PW Name User-defined name of the PW. This parameter is
configured via the PW menu (
Figure 4-14 ).
PW Name 1
PW Type Defines encapsulation type used for PW creation (see
Figure 4-15 )
CESoPSN, SAToP
PW Reordering Controls the packet reordering function Enable – Packet reordering is
enabled
Disable – Packet reordering is
disabled
Default: Enable
ToS Defines the ToS bit value 0-255
Default: 0
VLAN Tagging Controls the use of VLAN tagging Enable – VLAN tagging is enabled
Disable – VLAN tagging is disabled
Default: Disable
VLAN Priority Defines VLAN priority value if VLAN tagging is enabled 0–7
Default: 0
VLAN ID Defines VLAN tag value if VLAN tagging is enabled 0–4095
Default: 1
Ingress Label Defines the ingress MPLS tunnel label
(PSN to MiTOP-E1/T1 direction). Valid for MPLS
networks only.
16–65535
Default: 16
Egress Label Defines the egress MPLS tunnel label
(MiTOP-E1/T1 to PSN direction). Valid for MPLS
networks only.
16–65535
Default: 16
EXP Bits Defines the EXP bits value to be used for outgoing
traffic. Valid for MPLS networks only.
0–7
Default: 0
TTL Defines time-to-live value for the PW. Valid for MPLS
networks only.
0–255
Default: 0