Specifications

Installation and Operation Manual Chapter 4 Configuration
MiTOP-E1/T1 Ver. 1.0 Configuring MiTOP-E1/T1 for Management 4-3
Defining Management Access Permissions
MiTOP-E1/T1 management software allows you to define new users, their
management and access rights. Only superusers (su) can create new users and
change credentials of existing users.
³ To add a new user:
1. Make sure that you are logged in as su.
2. From the User Access menu, do the following:
 Click Forward to select a user level: Super User or User.
 In the User Name field, enter a name for a new user.
 In the Old Password field, enter a superuser password that was used to
log in during the current management session.
 In the New Password field, assign a password to a new user name.
 In the Confirm New Password field, re-enter the new user password to
confirm it.
MiTOP-E1/T1
Configuration > System > Management > User Access
User Level Super User
User Name su
Old Password
New Password
Confirm New Password
Forward
Figure 4-3. User Access Menu
Controlling Management Access
You can enable or disable Web access to MiTOP-E1/T1 via LAN.
³ To enable or disable Web access to MiTOP-E1/T1:
• From the Management Access menu (Configuration > System > Management
> Management Access), select LAN (Web) and enable or disable Web access
to MiTOP-E1/T1 via its LAN interface.
MiTOP-E1/T1
Configuration > System > Management > Management Access
LAN (Web) Enable
Figure 4-4. Management Access Menu