Specifications

Chapter 4 Configuration Installation and Operation Manual
4-2 Configuring MiTOP-E1/T1 for Management MiTOP-E1/T1 Ver. 1.0
MiTOP-E1/T1
Configuration > System > Management > Device Info
Description E1 Intelligent Converter
Device Name MiTOP-E1/T1
Location
Contact Person
Figure 4-1. Device Info Menu
Configuring the Host IP Parameters
In addition to defining the IP parameters of the MiTOP-E1/T1 host (see
Chapter 3 ), the management software allows you to create a dedicated
management VLAN in order to separate management traffic from the user data.
³ To configure the host IP parameters:
• From the Host IP menu (Configuration > System > Management > Host IP), do
the following:
 In the IP Address field, enter the host IP address
 In the IP Mask field, enter the host IP mask.
 In the Default Gateway field, set the default gateway IP address.
 Set Host tagging to be Tagged or Untagged to consider or ignore the
VLAN tagging of the management traffic coming from the management
station.
 If host tagging is enabled, enter:
 Host VLAN ID (ID of the host VLAN): 1–4094
 Host VLAN Priority (Priority of the host VLAN): 0–7
MiTOP-E1/T1
Configuration > System > Management > Host IP
IP Address 192.168.205.1
IP Mask 255.255.255.0
Default Gateway 0.0.0.0
Host Tagging Untagged
Figure 4-2. Host IP Menu