Specifications

MiTOP-E1/T1 Ver. 1.0 Configuring MiTOP-E1/T1 for Management 4-1
Chapter 4
Configuration
This chapter illustrates the configuration MiTOP-E1/T1 screens and explains their
parameters.
The menu tree of the MiTOP-E1/T1 management software is shown in
Chapter 3 .
4.1 Configuring MiTOP-E1/T1 for Management
Before configuring MiTOP-E1/T1 make sure to assign a new IP address, an IP mask
and a default gateway value to the unit’s host, as explained in
Chapter 3 . Once
the MiTOP-E1/T1 host IP parameters are set, perform the following steps in order
to configure MiTOP-E1/T1 for management:
•
Entering Device Information
• Configuring the Host IP Parameters
• Defining Management Access Permissions
• Controlling Management Access
• Enabling/Disabling I2C Cycle Stretching.
Entering Device Information
The MiTOP-E1/T1 management software allows you to assign a name to the unit,
add its description, specify its location to distinguish it from the other devices
installed in your system, and assign a contact person.
³ To enter device information:
1. From the Device Info menu (Configuration > System > Management > Device
Info), select Device Name and enter a desired name for the MiTOP-E1/T1 unit.
2. In the Device Location field, enter the desired name for the current
MiTOP-E1/T1 location.
3. In the Contact Person field, enter the name of a contact person.