Specifications

Installation and Operation Manual Chapter 3 Operation
MiTOP-E1/T1 Ver. 1.0 Configuration Alternatives 3-7
3. Connect SFP-CA to your PC via USB port.
The Ready LED on SFP-CA turns on.
4. Open the Web browser and enter http://192.168.205.1 into the Web
browser’s address field.
The Opening screen appears.
5. Click Login.
The Login screen appears.
6. Enter the default user name su and the default password 1234 for Super
User access, and then click Submit.
A menu appears to the left and you are able to configure MiTOP-E1/T1.
7. From the Host IP menu (Configuration > System > Management > Host IP),
enter the new IP address, the IP mask and the default gateway values.
8. Save the changes.
The new TCP/IP settings are assigned. You may continue specifying
additional parameters or connect to MiTOP-E1/T1 from any PC on your
network at a later stage, using the newly assigned IP address.
Navigating the Web-Based Management Menus
The MiTOP-E1/T1 Web-based remote access management software provides a
user-friendly interface for configuring, collecting statistics and performing
diagnostic tests on the MiTOP-E1/T1 units.
³ To choose an option:
1. Click a link in the Web configuration utility screen to display the next menu.
2. Once the target screen is displayed, select a value from the drop-down box or
enter it in a text box.
Menu Map
Use these menu trees as a reference aid while performing configuration and
control functions.
Chapter 4 illustrates menus and explains parameters. Table 3-2
lists default values.