Specifications

Chapter 3 Operation Installation and Operation Manual
3-2 Default Settings MiTOP-E1/T1 Ver. 1.0
Type Parameter Default Value
Fault Propagation Disable
Caused by:
LOS Disable
RDI Disable
AIS Disable
Fault Propagation WTR 0
Tx Disable Behavior Not Available
LOS Behavior LOS caused by:
LOS Disable
RDI Disable
AIS Disable
Management
Device Info Device Name MiTOP-E1/T1
Location –
Contact Person –
Host IP IP Address 192.168.205.1
IP Mask 255.255.255.0
Default Gateway 0.0.0.0
Host Tagging Untagged
Host VLAN ID 1
Host VLAN Priority 0
Management Access LAN (Web) Enable
Outband
Outband Mode
Normal
Outband Address
128
Physical Ports Interface Type E1
E1 TX Clock Source Internal Clock
Line Code HDB3
RX Sensitivity Long Haul
Line Type E1 G.732N CRC
T1 TX Clock Source Internal Clock
Line Code B8ZS
RX Sensitivity
Long Haul
Line Type Unframed
Line Length DSU: 0–133 ft