Specifications

Appendix C I2C Interface Management Installation and Operation Manual
C-8 Configuration Parameters MiTOP-E1/T1 Ver. 1.0
Index R/W Parameter
Length
Description
0x409 R 1 Bundle connectivity status
• 0: OAM disable
• 1: Out of sync
• 2: Not valid
• 3: Sync
0x40A R 1 Bundle HW lack of RX buffers
• 0: No
• 1: Yes
0x40B R 1 Bundle packet length error
• 0: No
• 1: Yes
0x40C R 1 Bundle RX loss sync
• 0: No
• 1: Yes
0x40D R 1 Bundle RX remote fail
• 0: No
• 1: Yes
0x40E R 1 Bundle RX LBIT modifier
0–3
0x40F R 1 Bundle RX length mismatch discard
• 0: No
• 1: Yes
C.6 Configuration Parameters
Table C-3. Configuration Parameters
Index R/W Parameter
Length
Description Default
0x514 R+W 1 E1 and T1 configuration
Digits 0–2, T1 only
• 000: 0–133 ft
• 001: 133–266 ft
• 010: 266–399 ft
• 011: 399–533 ft
• 100: 533–655 ft
• 101: -7.5 db CSU
• 110: -15 db CSU
• 111: -22.5 db CSU
Digits 0–2: 001
Digit 3: 1, Framed
Digit 4: 0, HDB3
Digit 7: 0, CRC enable for
E1 or 1