Specifications

Installation and Operation Manual Chapter 3 Configuration Instructions
DXC-100PSX Utilities Menu 3-25
3.6 Utilities Menu
The DXC-100PSX Utilities Menu allows you to re-initialize the Protection Switch
Controller Card as done upon power up.
During this boot up cycle, no user data will flow. Since the configuration resides
on the DSMC.2, the current N+1 Redundancy setup will be restored.
Reset the Protection Switch Controller Card
1. From the DXC-100 Nest Summary Menu, place your cursor on the
DXC-100PSX field and press <Enter>.
26. From the Protection Switch Main Menu, place your cursor on the
Utilities field
and press <Enter>. The following menu appears:
Utilities Menu
--------------
Reset Board
Figure 3-26. DXC-100PSX Utilities Menu
27. With your cursor on the Reset Board field, press <Enter>. The following
prompt appears:
Utilities Menu
--------------
************************************
* *
* -MESSAGE!- *
* *
* *
* Reset this Card? *
* *
* *
* Are you sure (Y/N)? *
* *
************************************
Figure 3-27. DXC-100PSX Reset Card Prompt
28. Press Y to reset the DXC-100PSX Controller Card. A message appears stating:
“-ALERT!- Please wait while we establish communications with the system
manager! Press any key to continue.”
29. Press any key. If this does not return you to the previous menu, press <Ctrl>
and the C key simultaneously.