Specifications

Installation and Operation Manual Chapter 3 Configuration Instructions
DXC-100PSX Status Menu 3-21
22. To access any of the menus on the Protection Switch Main Menu, place your
cursor on the desired field and press <Enter>.
Table 3-4. Protection Switch Submenu Functions
Submenu Function
Status View the status of the Switch box, whether a device has been switched, which slot a
redundant device is protecting, and if the device is missing a cable, not present or okay.
Utilities Reset the device.
About Displays information about the software release and version, and details about the
Interface Module.
3.5 Status Menu
Access the DXC-100PSX Status Menu
1. From the Nest Summary Menu, the DXC-100PSX device state should read
Online . If so, move your cursor to the DXC-100PSX field and press <Enter>.
The Protection Switch Main Menu (
1 Figure 3-23 ) appears.
23. From the Protection Switch Main Menu, move your cursor to the
Status field
and press <Enter>. The Protection Switch Status Menu appears:
Status Menu
-----------
Slot# Card Type Card Status Switch State Switch Status
----------------------------------------------------------------------------
01 Narrowband Redundant Ok Switched protect slot 02 Ok
02 Narrowband Primary Ok Switched Ok
03 Narrowband Primary Ok Normal Ok
04 Narrowband Primary Ok Normal Ok
05 Narrowband Primary Ok Normal Ok
06 Broadband '2' Primary Ok Normal Ok
07 Broadband '2' Redundant Ok Normal Ok
08 Broadband '1' Primary Cable Missing Normal Ok
09 Broadband '1' Primary Ok Normal Ok
10 Broadband '1' Primary Ok Normal Ok
11 Broadband '1' Redundant Ok Normal Ok
Power Supply A Status.: Ok Fan Maintenance: Auto Fan #01: Ok
Power Supply B Status.: Fault Fan Speed......: Low Fan #02: Ok
Chassis Temperature...: 85 F/29 C Fan #03: Ok
Figure 3-24. Protection Switch Status Menu
The fields contained in the Protection Switch Status Menu are displayed in
1 Table 3-5 .