Specifications

Chapter 3 Configuration Instructions Installation and Operation Manual
3-20 Accessing the Main Menu DXC-100PSX
N+1 Redundancy Status Menu
Member of Redundancy Group: Yes
Card Type.................: Secondary
Device State..............: Online
State Change Count
---------------------
Frame Sync Pulse.............: OK 0
Backplane Timeslot Management: OK 0
Communication with System Mgr: OK 0
Rear Card....................: OK 0
Framers......................: OK 0
[C]lear counters
Figure 3-22. N+1 Redundancy Status Menu - Broadband (DT3 or DE3) Redundant Device
From this menu you can view the status of the DT3 or DE3 device that is
established as the redundant device. As shown in
1 Figure 3-22, the device is
Online , which, in this case means the redundant device is passing traffic for the
primary card. All events generated are reported under the slot number of the
redundant device.
The N+1 Redundancy Status Menu for a Primary Device displays the same fields.
The Card Type field is, of course, dependent upon the installed card.
3.4 Accessing the Main Menu
If you have a Protection Switch coupled with the DXC-100 system and
operational, you will be able to access the Protection Switch Main Menu.
Access the DXC-100PSX Main Menu
1. From the Nest Summary Menu, the DXC-100PSX device state should read
Online . If so, move your cursor to the DXC-100PSX field and press <Enter>.
The following menu appears.
Main Menu
---------
Status
Utilities
About
Figure 3-23. Protection Switch Main Menu
Note