Specifications

Installation and Operation Manual Chapter 3 Configuration Instructions
DXC-100PSX Setting Up Multiple NDRGs 3-19
N+1 Redundancy Status Menu
Member of Redundancy Group: Yes
Card Type.................: Secondary
Device State..............: Online
State Change Count
---------------------
Frame Sync Pulse.............: OK 0
System Clock.................: OK 0
Backplane Timeslot Management: OK 0
Communication with System Mgr: OK 0
Rear Card....................: OK 0
Framers......................: OK 0
[ C]lear counters
Figure 3-20. N+1 Redundancy Status Menu - Narrowband (D8E1T1) Redundant Device
From this menu you can view the status of the D8E1T1 device that is established
as the redundant device. As shown in
1 Figure 3-20, the device is Online , which, in
this case means the redundant device is passing traffic for the primary card. All
events generated are reported under the slot number of the redundant device.
The N+1 Redundancy Status Menu for a Primary Device displays the same fields.
The Card Type field is, of course, dependent upon the installed module.
View Broadband N+1 Device Redundancy Details
1. From the Broadband device’s Main Menu, place your cursor on the N+1
Redundancy
field and press <Enter>. The following screen appears:
N+1 Redundancy Menu
-------------------
Protected Slot: 10
Device Redundancy
Figure 3-21. N+1 Redundancy Menu - Broadband (DT3 or DE3) Redundant Device
21. Place your cursor on the Device Redundancy field and press <Enter>. The
following screen appears:
Note