Specifications

Chapter 3 Configuration Instructions Installation and Operation Manual
3-2 Verifying Protection Switch Installation DXC-100PSX
Protection Switch Status Menu appears: it should look similar to the one
shown in
0 Figure 3-2 .
Status Menu
-----------
Slot# Card Type Card Status Switch State Switch Status
----------------------------------------------------------------------------
-
01 Narrowband Redundant Ok Normal Ok
02 Narrowband Primary Ok Normal Ok
03 Narrowband Primary Ok Normal Ok
04 Narrowband Primary Ok Normal Ok
05 Narrowband Primary Ok Normal Ok
06 Broadband '2' Primary Ok Normal Ok
07 Broadband '2' Redundant Ok Normal Ok
08 Broadband '1' Primary Cable Missing Normal Ok
09 Broadband '1' Primary Ok Normal Ok
10 Broadband '1' Primary Ok Normal Ok
11 Broadband '1' Redundant Ok Normal Ok
Power Supply A Status.: Ok Fan Maintenance: Auto Fan #01: Ok
Power Supply B Status.: Fault Fan Speed......: Low Fan #02: Ok
Chassis Temperature...: 85 F/29 C Fan #03: Ok
Figure 3-2. Protection Switch Status Menu
To expose additional information about the Protection Switch, go back to the
Nest Summary Menu, and at the
DXC-100PSX field, press the E key. The resulting
screen should look similar to the one shown in
1 Figure 3-3 .
Protection Slot Information
----------------------------------------------- ----Major Alarms---
Device........: Online Power Supply A: Ok
Psx Controller: Rev #0 Power Supply B: Ok
Chassis.......: Undetermined Fan 1.........: Ok
Fan 2.........: Ok
Fan 3.........: Ok
PSX Interface Card Alarms
01=None 02=None 03=None 04=None 05=None 06=None
07=None 08=None 09=None 10=None 11=None
Figure 3-3. Protection Switch Slot Information Display
The screen above shows the Protection Switch is online, and operating with the
Rev. 0 Controller Module. In this case, the chassis is
‘Undetermined ’ because a