Specifications

Chapter 1 Overview Installation and Operation Manual

1-8 Physical Description DXC-100PSX

Thumbscrews are provided at the top and bottom of the faceplate to secure the

module in the chassis and to make an electrical connection to frame ground for

regulatory emission compliance. See

Figure

1-4

for an illustration of a

Narrowband Primary Module.

A single 50-pin (AMP 552725-1 telco-type) female receptacle is mounted on this

module and is used to directly interface the narrowband network facilities in

place of the identical DXC-100-resident D8E1T1 (primary) port interface, which is

now interfaced via the integrated "elephant trunk" cable assembly.

See

Table

1-3

for the connector configuration and associated pinouts.

Figure

1-4. Narrowband Primary Module

D8E1T1/P