Specifications

D8E1T1 Installation and Operation Manual Chapter 1 Overview
Physical Description 1-3
Other LED Indications
When all front panel LEDs are cascade lighting from top to bottom, the module is
downloading software to memory.
Do not interrupt the software upgrade while it is in progress, otherwise the
D8E1T1 module configuration may be damaged. In the event of damage, please
contact RAD Technical Support Department.
If all front panel LEDs are off except the READY LED, it indicates that all links are
Out of Service.
If all LEDs are flashing, it indicates that the rear interface module is missing or the
device is being forced Out of Service.
Interface Module Panel
The interface connector of D8E1T1 is located on the interface module that plugs
into a separate compartment in the rear of the DXC-100 chassis.
Figure 1-2 shows the panel of the D8E1T1 interface module. The interface module
has one RJ-48M connector that includes all the link interfaces.
Figure 1-2. D8E1T1 Interface Module Panel
P1
D8E1T1
Caution