Specifications

D8E1T1 Installation and Operation Manual Chapter 4 Troubleshooting and Diagnostics
Expose (Link Status) 4-23
Navigation:
D8E1T1 Main Menu
↓
Diagnostics
↓
Line Diagnostics Center
↓
Select T1/E1 Link
↓
Specific Error Hot Key
OR D8E1T1 Main Menu
↓
Diagnostics
↓
Line Diagnostics Center
↓
Select T1/E1 Link
↓
[E]xpose
↓
Specific Error Hot Key
T1/E1 Link Status
-----------------
Link#: 1 Name: Circuit Number
-------------- State ErroredSec
Red Alarm.....: On 0 Crc Errors.........: 0
Yellow Alarm..: Off 0 Bpv Errors.........: 0
Loss Of Signal: On 0 Frame Bit Errors...: 0
AIS Indication: Off 0 Trunk Conditioning.: On
Out Of Frame..: On 0
SEF Indication: On 0
Transmit Slip.: Off 0
Receive Slip..: Off 0
[C]lear Counters Re[i]nitialize
ESF [S]tatistics 15-min Performance [R]egisters [G].826
------------ Hit key 1 thru 9 to insert an error------------------------
[1]CAS Multiframe [2]Multiframe [3]PRBS [4]FBit
[5]Frame Alignment [6]Line Code Violation [7]Bit Slip [8]CRC [9] All
Figure 4-15. T1/E1 Link Status Menu - Error Insertion Choices
1. Press the specific numeric key indicated on the bottom of the menu to insert a
momentary error. The errors and their corresponding hot keys are detailed in
Table 4-12.