Specifications

D8E1T1 Installation and Operation Manual Chapter 4 Troubleshooting and Diagnostics
Expose (Link Status) 4-19
T1/E1 Link Status
-----------------
Link#: 1 Name: Circuit Number
-------------- Stat
Red Alarm.....: On ***************************************
Yellow Alarm..: Off * *
Loss Of Signal: On * -MESSAGE!- *
AIS Indication: Off * *
Out Of Frame..: On * *
SEF Indication: On * Reset and re-configure the framer? *
Transmit Slip.: Off * *
Receive Slip..: Off * *
* Are you sure (Y/N)? *
* *
***************************************
[C]lear Counters Re[i]nitialize
ESF [S]tatistics 15-min Performance [R]egisters [G].826
------------ Hit key 1 thru 9 to insert an error------------------------
[1]CAS Multiframe [2]Multiframe [3]PRBS [4]FBit
[5]Frame Alignment [6]Line Code Violation [7]Bit Slip [8]CRC [9] All
Figure 4-12. Reset Framer Prompt
1. Press Y. The T1/E1 framer will be re-initialized, and you are returned to the
T1/E1 Link Status submenu. Press N, and you are returned directly to the
T1/E1 Link Status Menu without the framers being re-initialized.
15-Minute Performance Registers
The 15-Minute Performance Registers Display is a read-only display. It provides
the same information as the ESF Statistics Display, but it is broken down by link for
each of the ninety-six 15-minute intervals in the preceding 24-hour period. The
information has no meaning in Clear T1/E1 Unframed mode.
Navigation:
D8E1T1 Main Menu
↓
Diagnostics
↓
Line Diagnostics Center
↓
Select T1/E1 Link
↓
15-min Performance [R]egisters
OR D8E1T1 Main Menu
↓
Diagnostics
↓
Line Diagnostics Center
↓
Select T1/E1 Link
↓
[E]xpose
↓
15-min Performance [R]egisters
15-Minute Performance Registers cannot be displayed for a D4-framed link.
Note